COOLPAD How To Flash CoolPad Firmware Via YGDP Tool

YGDP Tool is the official firmware flashing tool for CoolPad devices. YGDP tool is unique in functionality because it supports firmwares in .CPB format.

If you have a Coolpad device, whether it’s powered by a Qualcomm or Mediatek chip, you can comfortably flash firmwares to it via YGDP Tool

Always endeavor to have a stock backup of your stock firmware or its core partitions before flashing another ROM. Do not flash an incompatible firmware to your Coolpad device or else you might risk bricking your device, lose network connectivity, etc Use original USB cables for flashing. Do not for any reason interrupt an ongoing flashing process until it’s successfully completed. By the way, you were the one that started it. So, wait or risk bricking your device ): 

Requirement;  

To get things ready before successfully flashing your Coolpad with it’s stock firmware, follow the instructions below.

 Download YGDP Tool v5.000 latest version – 

Download Link Extract YGDP Tool to your PC.  

 

Flashing Tutorial

If the above requirements have been met, you can proceed with the flashing tutorial below.

1. Go to the folder where you extracted YGDP Tool and launch YGDPC.exe (YGDP_Setup_V5.00>Tool>YGDP.exe)
2. Select Customer, Developer or Assembly and click on Login.
3. Click on Config button at the top left.
4. Click on the folder icon after Please select CPB file.
5. In the next window, locate and select the CoolPad .CPB firmware from the stock ROM you extracted and click Open.
6. Still waiting for me? Click on Apply.
7. Wait for YGDP TOOL to load the files.
8. Once YGDP TOOL has finished loading the files successfully, you should see Verify Data File Ok at the bottom left.
9. Click on START button at the top.
10. We are almost done! Turn off your Coolpad device and wait for it to turn off completely.
11. Now press and hold Volume Up (Vol +) button before connecting your device to the PC via a USB cable.
12. When your device (Coolpad) is connected properly, you should see Cell 0 become Yellow.
13. Wait until the flashing process is completed successfully. You will see a progress bar at the left which will turn green at 100% to notify you when the firmware has been flashed.
14. You can now unplug your device.

It was easy right? If you find this useful, please share and also drop your comments.