How to update mtk smart phones using smart phone update tool v1.4

I noticed that there is usually a problem when trying to flash/update some devices with MT6577 & MT6575 chip using the popular sp flash tool or even flashing box. You end up with different errors which is mostly related to the firmware. Most of the time the firmware works just fine and matches the devices perfectly but these tools don’t agree (grinds) 😊😊

Now here comes smart phone update tool v1.4 which is like the older version of smart phone multiport tool has the ability to flash these devices with no errors. Try this tool.

Note that this tool can only be used on older devices. It will not work on new popular mtk chips.

DOWNLOAD

HOW TO USE

Launch smart phone update tool

Click on OK when the Load DA file error message pops up

Now click on file and select Open Download Agent file

Select MtK_AllInOne_DA.bin

Now click on Scatter file button then navigate to the firmware folder and select MT6XXX_Android_Scatter_emmc.txtfile

Click Start all button

If you see the cannot find checksum.ini error, copy and launch checksum_gen.exe file inside firmware folder. When its done, the cmd screen will disappear

Now Click start all button again

Turn off device and connect to PC wth USB cord

Wait for process to complete

Disconnect and boot phone

Note that first boot after this process takes longer than normal